Activity Stream

Now that's good **** right there man!!! Na it usually happens when guys are like, "is that a fish" and touch the screen not realizing it's touch...

If you search Homer on here you'll see a few posts from me and they have pics of the engine comp with the 6BT and genny setup. It's tight to say the...

Yup, what ya search by ESN in Quickserve both kick out the same 3802829, that's the turbo kit, seals and all, turbo is 353662 IIRC.

I made that mistake as well, having mine rebuilt on my D4, it was much better but still wouldn't out out the boost needed for the same reason.

Cummins changes part numbers all the time. Does it match any number in Cummins quick serve when you search by serial number? Andy

Do either of the parts numbers on your current Turbo's match up with the one they installed on mine?

Its amazing how guests do that. They even wonder what the toggle switches and buttons do. Had someone turn electronic switch off, in the fog with...

First I paid for the rebuild kits and had mack boring rebuild my turbos. They didn’t work because you can’t rebuild the wall around the exit turbine...

Have you tried running with it up? Also do you remember or know the size of pipe for those lee's clamp-on rod holders on your tower? I need some...

I have to believe those hose extensions on the draw straws are factory (and thus way darn old). I was going to pull the draw straws this past off...

This is tough to call because there are so many dependencies. I can only relate according to my own experience with a significantly different system....

the fit easier than the 6BT does.

D6’s will fit the engine box, They are only 1/2 inch longer than the KAMD/KAD 230-300 series that went in the boat prior to ‘06. They will fit with a...

Does anybody have a suggestion?

I replaced them shortly after I bought the boat so they are probably 10 years or more.

Are we talking knots or mph? The sweet water guys tend to use mph and the salt guys lean more towards knots. There are not many 28's with D6's...

Are the fuel lines old. Ethanol makes them soft, then little blacks balls screw everything up.

New AS valves and fuel line will be here this week. I did look in the one tank after being towed in and I could not see any debris or water, but I...

Looks lie it was a combination of user error as a friend was playing and set it to auto which I missed, and just no dam fish under us. I was on the...

My that's a good idea, would have been great on my remote hunts in Kodiak.

I need to tell my guys that

Visual inspection of the tanks. New Fuel lines to the pump including the smaller water line to fuel cell. Thats good advise. Is your LP pump...

Called them, they couldn't find the turbo part numbers I have, gave them serial for engine, said it's a 3802829 Holset as well. They were a little...

Repowered with D4260 Inboards. Engines, gears, controls, shaft seals, oil change pump manifold, block heaters, cutlass bearings, engine room...

Forgot about the screens at the end of the draw straws. If they are plugged or otherwise restricted, all else is for naught. When pulling a AS valve,...

Call Naples Turbo in Florida. Have a buddy who bought some for his 6B’s. They were at a really good price, can’t remember the exact price but they...

Please do. Let me know if it’s any better.

John, I don't know about it. The part numbers on the web page don't cross match with the turbo Cummins replaced on my port engine at the end of...