My helm light mounted under the electronics box is a two bulb light made by the Guest Co. from CT. Based on how it's been acting up over the last year I think the on/off push switch has finally bit the dust and I'm assuming the easiest thing is to replace the entire unit. I removed the two screws that I thought were holding it on but still couldn't budge it. Must be on some kind of bracket. Anyone have any advice as to how to remove it? Thanks.
Announcement
Collapse
No announcement yet.
Helm light
Collapse
X
-
2 screws inside casing
The 2 external screws replace the plastic light casing. Inside that is the bulb and wires. 2 scews inside the casing held mine to the bottom of the upper box.
Now can you tell me where the duplex wire goes?
I need to get a dental mirror for all those hard to see spots behind things!
-
-
Thanks but it sounds like we've got different lights. No external screws on mine and taking the two internal ones out didn't seem to do anything although I was too chicken to start prying. If I wrestle it off this weekend I'll let you know where the wires go.Dave
2001 25\'CC
KAMD-43P Volvo deisel
Comment
-
Comment