I have the valve set for the holding tank, as per coast guard regulations as they check in harbor. Anyhow, someone used it without my knowledge the toilet. As far as emptying the tank whats involved? just turn the head pump on and thats it? Do i need to do anything with the y valve in bilge or something? i never used it before. If anyone has some insight i would much appreciate it. thanks.
Announcement
Collapse
No announcement yet.
35 cc toilet
Collapse
X
-
The 32 and 35 have a vacu flush system which is different than the 28 which is mechanical I believe. All you need to do is turn on the pump with the breaker on the circut panel. If you follow the hose from the intake of the pump by the thru hull it should go to the bottom of the holding tank. It is located under the steps leading to the cabin on the 32. I assume it is in the same location on the 35.Life is to short for an ugly boat
sigpic
2015 Enclosed Helm 35
Tom
Comment
-
Originally posted by Split Decision View PostThe 32 and 35 have a vacu flush system which is different than the 28 which is mechanical I believe. All you need to do is turn on the pump with the breaker on the circut panel. If you follow the hose from the intake of the pump by the thru hull it should go to the bottom of the holding tank. It is located under the steps leading to the cabin on the 32. I assume it is in the same location on the 35.
Comment
-
Originally posted by DigDug View PostSorry to resurrect an old thread. So the waste water holding tank is under the cabin steps? Do you also know what is under the starboard bench seat below the electrical panel? Thanks, just curious why there’s no storage in those areas.
There is limited storage under the bench seat. I put the same door that is used in the head upper cabinet. You will need to put a floor in there since there is a gap between the hull and liner or small stuff will fall through.Life is to short for an ugly boat
sigpic
2015 Enclosed Helm 35
Tom
Comment
-
Jim B.
FLY'N FISH 35 Classic
Va. Beach
Comment
Comment