Announcement

Collapse
No announcement yet.

What type of Stain is on teak?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What type of Stain is on teak?

    I have a 2004 28cc the head door has some scraches on the vener like if the dealer tried to use steel wool or an orbit sander how can i redo or tuch it up what type of stain was used in the boat?
    GO DEEP!!!!! TAKE A KID FISHING......

  • #2
    Mac uses the clear (natural) watco oil finish on the teak. If it has swirles from an orbital, use 180 grit by hand with the grain to get them out. Be careful not to go through the veneer and then re oil. You can also try fine steel wool with oil to get the scratches out.
    Life is to short for an ugly boat

    sigpic
    2015 Enclosed Helm 35
    Tom

    Comment


    • #3
      Thanks for the info i will try to find the oil and try the fine steel wool first. on 7/1/06 i thought i herd you on the vhs at the tip. next time i will pass on info on the fish. thanks for the reply

      Dave
      The Shark Hunter
      GO DEEP!!!!! TAKE A KID FISHING......

      Comment


      • #4
        I would recommend trying to find stainless steelwool. If strands of regular steelwool are left behind they can leave rust stains from the saltwater. They make sanding sponges or scotch brite pads that work great.

        Just my 2 cents
        1997 CC28

        Brian

        Comment

        Working...
        X