Wiring through tower

[leterrip1522]

Great site. Bought a '95 25' last year. I want to install a Garmin 2060c plotchatter but the only place seems to be between the helm and the access to below. How do I get the antenna wire through to this chartplotter. Looking at it this weekend it seems that I somehow need to snake it through.

Help!!!

Many thanks

[leterrip1522]

Wiring through tower

Figured it out. Used a wire snake to take GPS antenna wire from hardtop through electronics box and then down through the tower to the starboard gunnel (?), pulling wire through the access panel/hole and then back to the helm. I placed the Garmin 1060c to the left of the helm. Had to run power wires through cutty cabin but it looks great.

[outriggers]

When you do pull the wire pull a string with it in case you want to pull something else at a later date. If you have radar the starboard pipe out of the upper electronics box is really full. You might have to find a route out the left side and cross over in the engine compartment or behind the engine compartment bulkhead to get back to the helm area.